Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.     

Unbridged bidentate aluminum complexes supported by diaroylhydrazone ligands: Synthesis,structure and catalysis in polymerization of ε-caprolactone and lactides

A series of novel diaroylhydrazone aluminum complexes have been synthesized and well-defined structurally, and their catalytic performance in the polymerization of ε-caprolactone and lactides have also been evaluated. Complexes [(L^1–4)₂AlMe] ( 1 – 4 ) {[L¹ = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCOC₆H₅], [L² = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCO(C₆H₄–4-OCH₃)], [L³ = (3,5-^tBu₂–2-OMe-C₆H₂)CH=NNCO(C₆H₄–4-Br)] and [L⁴ = (2-OMe-C₆H₄)CH=NNCO(C₆H₄–4-^tBu)]} were prepared through treatment of AlMe₃ with the corresponding proligands L^1–4H in molar ratios of 1: 1 or 1: 2. Chemical structures of all the complexes were well-defined by elemental analysis, NMR spectra as well as single-crystal X-ray study. Complexes [(L^1–4)₂AlMe] ( 1 – 4 ) in this work represent the first examples of aluminum complexes of aroylhydrazone ligands with crystallographic characterization. Specifically, they are all in monomeric form with a penta-coordinated aluminum center, including two approximately co-planar five-membered metallacycles with aluminum. Introduced bulky tert-butyl substituents in aroylhydrazone ligands could affect the geometry around the central metal which is a distorted square-based pyramid in complexes 1 – 3 while being a trigonal bipyramidal in complex 4 , thus affecting their catalytic behaviors. The complexes can successfully catalyze the ring-opening polymerization of ε-caprolactone and _L-lactide under mild conditions without any activator. In addition, complexes 1 – 4 could also polymerize rac-lactide, affording atactic polylactides with high conversions and good controllability in relatively short reaction time.     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931     

Maltodextrin as stabilizer for emulsion polymerization: Adsorption and grafting behavior

Emulsion polymerization of the three-monomer system butyl acrylate–styrene–methacrylic acid was performed in batch using a commercial maltodextrin derived from starch degradation as stabilizer. Stable latexes with narrow particle size distributions were obtained in all examined cases. A method was developed to analyze and quantify the partitioning of the maltodextrin between the continuous phase (supernatant) and the particle phase. Significant differences between the polysaccharides adsorbed onto particles with or without emulsion polymerization reaction were observed. The possible reactions of maltodextrin in presence of a radical initiator were studied in aqueous phase, thus confirming maltodextrin degradation. The formation of copolymers involving the original monomers and the stabilizer according to two different reactive pathways was also confirmed. In terms of adsorbed maltodextrin, two different contributions were observed: maltodextrin physically adsorbed and maltodextrin chemically grafted and/or physically incorporated into the polymer.     

Architectural control of polystyrene physical properties using branched anionic polymerization initiated at ambient temperature

Ambient temperature-initiated anionic polymerization has generated branched polystyrenes of varying molecular weights and architectures by inclusion of a distyryl branching comonomer into a conventional sec-Butylithium-initiated polymerization of styrene. Primary chain length control within the branched polymers, and restriction of the branching points to varying segments of the primary chains, led to variations of glass transition temperature with no direct correlation to the branched polymer molecular weight but a strong relationship to the length of individual chains comprising the branched macromolecules.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

High strength,acid-resistant composites from canola,sunflower, or linseed oils: Influence of triglyceride unsaturation on material properties

Here are reported composites made by crosslinking unsaturated units in canola, sunflower, or linseed oil with sulfur to yield CanS , SunS , and LinS , respectively. These plant oils were selected because the average number of crosslinkable unsaturated units per triglyceride vary from 1.3 for canola to 1.5 for sunflower and 1.8 for linseed oil. The remeltable composites show compressive strengths that increase with increasing unsaturation number from CanS (9.3 MPa) to SunS (17.9 MPa) to LinS (22.9 MPa). These values for SunS and LinS are competitive when compared with the value of 17 MPa required for residential building using traditional Portland cement. The plant oil composites are recyclable over many cycles and can retain up to 100% of strength after 24 hr in oxidizing acid under conditions where Portland cement is dissolved in under 30 min. Infusion of the composites into premade cement blocks affords them with significantly improved acid resistance as well. This work thus provides a simple, nearly 100% atom economical route to convert plant oils and waste sulfur to composites having enhanced performance over commercial structural materials.     

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Investigation of photopolymerization kinetics of 4-(4-methacryloyloxyphenyl)-butan-2-one (1) in comparison with 2-phenoxyethyl methacrylate (2) and phenyl methacrylate (3) using a UV-LED emitting at 395 nm shows significantly faster polymerization of 1 compared to both 2 and 3 at 40°C. Vitrification affects photopolymerization kinetics of all methacrylates under investigation. Interestingly, quantitative final conversion is observed during photoinitiated polymerization of 1 and 2 whereas 3 shows limited conversion at about 80%. Furthermore, higher degree of polymerization is obtained by photoinitiated polymerization of 1 compared to 2 and 3. This shows that the 3-oxobutyl substituent at the phenyl ring of 1 significantly affects both polymerization kinetics and final conversion of the photoinitiated polymerization. Moreover, an additional higher molecular weight fraction is observed in case of polymerization of 1 at 85°C that is above the glass transition temperature of the polymer formed during photoinitiated polymerization. As a thermal polymerization at 85°C in the absence of light results in a high molecular weight polymer as well, an additional thermal process may be discussed as reason for the higher molecular weight polymer fraction in case of the photopolymer made at 85°C.     

Donor-acceptor copolymers from cyclopentannulation polymerizations with dicyclopenta[cd,jk]pyrene and dicyclopenta[cd,lm] perylene acceptors

A series of donor-acceptor copolymers with dicyclopenta[cd,jk]pyrene and dicyclopenta[cd,lm]perylene acceptor units was prepared via palladium catalyzed cyclopenta-annulation reactions. The acceptor units were paired with diethynyl containing donor groups based on benzo[1,2-b:4,5-b’]dithiophene, thieno[3,2-b]thiophene, and 4-octyl-4H-dithieno[3,2-b:2′,3′-d]pyrrole to create six polymer variants. The cyclopentannulation polymerization resulted in copolymers with molecular weights (Mn) of 6–14 kDa and broad light absorption in the visible region with band gaps of 1.38–1.85 eV. The synthetic methodology, as well as optoelectronic properties, including thin-film absorption and cyclic voltammetry, of the donor-acceptor copolymers are presented.